bimmer-tool Lite

bimmer-tool empowers you to diagnose and address issues in your BMW, offering comprehensive functionality for reading and clearing fault codes, initiating DPF regeneration, accessing live engine data, and much more. While its capabilities are extensive, functionality for pre-2008 models is somewhat limited, and a K+DCan USB cable connection is strongly recommended for optimal performance. Wireless ELM adapter connectivity might be unreliable or offer restricted functionality on these older vehicles.

Essential Note: A reliable OBD adapter is crucial for bimmer-tool's operation. We recommend using a K+DCan cable, an ENET adapter (for F/G series), or one of the Bluetooth adapters listed below:

• Vgate vLinker MC/FS/BM/FD: https://www.vgatemall.com/products/
• UniCarScan UCSI-2000/USCI-2100 (Set D-Can mode to MODE2): https://www.wgsoft.de/shop/obd-2-komplettsysteme/unicarscan/114/unicarscan-ucsi-2000-diagnoseadapter https://www.bmdiag.co.uk/unicarscan-ucsi-2000-bluetooth-obd2-adapter
• Carista: https://caristaapp.com/adapter
• Veepeak OBDCheck BLE: https://www.veepeak.com/product/obdcheck-ble

bimmer-tool's Key Features:

• Comprehensive DPF regeneration status and detailed information
• Initiate DPF regeneration
• Reset DPF adaptation values (post-filter replacement)
• Exhaust fumes pressure readings
• Injector adjustment readings
• Real-time and expected values for air mass, intake manifold pressure, and fuel pressure
• Data logging to CSV for analysis
• Battery replacement registration (without altering battery properties)
• Resetting short-circuit blocked lamp circuits
• Oil/brake service and interval resets**

Supported OBD Adapters:

• K+D-Can USB (Recommended for reliability; requires USB-OTG cable)
• ENET cable/WiFi Adapter (Recommended for F & G series; requires USB-C to Ethernet adapter)
• ELM327 Bluetooth (Slower than USB; genuine ELM327 or PIC18-based adapters only; may not work with older engines)
• ELM327 WiFi (Less stable than Bluetooth; may require disabling mobile data)

Need assistance? Contact us via email—our address is at the page footer.

Quick Start Guide:

1. Connect adapter to the OBD II port.
2. Turn the ignition on.
3. Connect the adapter to your phone (USB: Use USB-OTG; Bluetooth: Pair via phone settings; WiFi: Disable mobile data, connect to adapter's WiFi).
4. Launch the app, select your car's model and year.
5. Navigate to 'Connection,' choose the connection type, adapter type, and communication protocol.
6. Tap 'Connect'.

**Limitations:** For models before 2008 and e46/e39/e83/e53, a K+DCan cable is required, and only the engine ECU is supported. Wireless ELM adapter connectivity may be impossible.

Common Issues:

• Engine 'No response' error (pre-2007, BT/WiFi): Try selecting ATWM in advanced connection settings.
• No connection: Ensure correct adapter and protocol settings. If the issue persists, force-stop diagnostic apps (including bimmer-tool) or restart your phone.

Permission Rationale:

• Storage: USB adapter support.
• Photos/Media/Files: CSV file creation.
• Bluetooth: Bluetooth adapter support.
• Network Access: WiFi adapter support.
• Location: Not used by the app.

What's New in Version 3.7.6-L (Nov 10, 2024):

• Diesel idle speed adjustment
• Throttle body control

bimmer-tool Lite Screenshots